 | ||
Exchange Forum >
Search Forums
Search Results | ||
| ||
| AutoLISP and Visual LISP | ||
AutoCAD LispWiki
F2T31P1#3
"Here's a new website link that may be of interest. It's called AutoCAD LispWiki and it's is refered to as a wiki code repository for...
F2T31P1#5
Flynn, Thanks for your help. Do you have e-mail address who wrote Steel Shape Parametric routines? If you do, please forward the...
F2T31P1#7
Bennett, Thanks for your help. I will run the program and see what happens. Theo...
Steel Deck Routine Rewritten
F2T36P1#1
Flynn, I rewrote your Steel Deck routine. It ran better. The steel deck section joined. The default depth of the section is 2.5" based...
SD.lsp
F2T36P1#3
Flynn, I made it by picking two points, so the cover width is determined by your pickings. Regards, Theodorus Winata...
Move, Rotate and Change Layer
F2T39P1#1
Move, Rotate and Change Layer on selected objects. Layers selection is on layer list...
MRC.dcl
MRC.lsp
F2T39P1#3
Justin, The blue box is an image with color blue (5). I put it between radio button Move to a Distance and Move and Rotate. The...
Help joining polylines
F2T47P2#11
Alan, I tested JAL.lsp, Join All Lines, but it didn't work. Command: JAL No valid objects selected. *Invalid selection* Expects a point...
JAL.lsp
Break a Series of Lines, Intersect with another Line. (Help)
F2T51P1#1
J Briggs, Please help fix the program. It has to break a series of lines, intersect with another line. Broken lines will offset based on user...
F2T51P1#3
J Briggs, The program hasn't worked, yet. Please run again and show me how to fix it. Thanks, Theodorus Winata...
F2T51P1#5
J Briggs, You are getting there, but not quite what intended. I attach BG3.pdf for better what is intended. Thanks, Theodorus Winata...
BG3.pdf
F2T51P1#7
J Briggs, Well done. Thanks so much for your help, you cracked the code which puzzled me for a while. Regards, Theodorus Winata...
Freeze Objects Inside Viewports
F2T54P1#1
Hi, Here's an old program but it's still effective. I tested in Acad 2008, and it works well! Cheers, Theodorus Winata...
VF.lsp
Please Fix Freeze XREF Layers!
F2T55P1#1
Hi, Can someone help me with this lsp file? The attached XF.lsp can not freeze XREF layers. Please take a look and tell me how to fix...
XF.lsp
Help Fix Isolate Layers!
F2T57P1#1
Hi Everybody, Attached is ILA.lsp (Isolate Layers), it works with Acad 2004. Since I upgraded to Acad 2008, it doesn’t work. Could...
ILA.lsp
F2T57P1#3
Terry, Your Isolate.lsp works. To turn back on layers after Isolate executed, I can use (Command “_.-LAYER” “_ON” “*” “”)! Thanks for...
Help Fix FT.lsp (similar to Flatten in AutoCAD)
F2T58P1#1
Hi Everybody, I wrote FT.lsp, simplified version of Flatten AutoCAD command. Please help to make the routine works. Thanks for your...
FT.lsp
F2T58P1#3
Terry, Thanks for rewriting Flatten.lsp. Flatten2 can do the same function, I like it. Thank you very much. Theodorus Winata...
| ||
| Beta Testing Forum | ||
|
PlotDwgs, a plot utility program
F3T1P1#8
Terry, Here is the plot sequence I copied: Command: -PLOT Detailed plot configuration? [Yes/No] <No>: Y Enter a layout name or...
| ||
| Dcl Dialogs | ||
|
W-Shapes dat file for dialog
F4T7P1#6
Trevor and J Briggs, well done! Are you going to write Angles and C Shapes program? Looking forward to seeing it. Thanks...
C Shapes
F4T8P1#1
Hello J Briggs, I copied and renamed W Shapes written by Trevor and fixed by you to Cshapes.lsp. When I ran the program, it left an...
Cshapes.dcl
Cshapes.lsp
F4T8P1#3
J Briggs, Thanks for your valuable help to fix the program and thanks to Trevor to use his W Shapes as a base program. Well done to...
Angles
F4T10P1#1
J Briggs, Thanks for fixing C Shapes program. Now I'm working on Angles. Here is what I have so far, please run it and tell me how to...
Angles.dcl
Angles.lsp
F4T10P1#3
J Briggs, I rewrote Angles.lsp to Lshapes.lsp as attached. When I ran the routine, Leg Thickness popup_list blank. ; error: too many...
Lshapes.dcl
Lshapes.lsp
Request Help! Standard Channels
F4T12P1#1
Hello Everybody, Based on L-shapes by Trevor, I rewrote the program to Csp.lsp (Standard Channels). When I ran the program it left...
Csp.dcl
Csp.lsp
F4T12P1#3
JPS, Thanks for pointing out the error, I really appreciate your help. Cheerio Theodorus Winata...
Request Help! Cold-Formed Z-Sections
F4T16P1#1
Hello Everybody, I wrote a program CFZ.lsp to draw cold-formed z-sections. When I executed the routine, a message appeared; error...
CFZ.dcl
CFZ.lsp
F4T16P1#3
J Briggs, Thanks for your invaluable help to fix the problem. Now I have to work on the geometry of the Z-section, because it draws a...
F4T16P1#5
J Briggs, In my draft written (setq P7 (polar P6 (* pi 0.75) StiffDep)). In the lisp I wrote (setq P7 (polar P6 (* pi 1.75) StiffDep)). I fix the...
Request Help! Cold-Formed C-Sections
F4T19P1#1
J Briggs, I copied and renamed CFZ.lsp you fixed to CFC.lsp to produce Cold-Formed C-Sections. I executed the program, error...
CFC.dcl
CFC.lsp
F4T19P1#3
J Briggs, Thank you very much to let me have the winning program. You are very helpful and kind. Regards, Theodorus Winata...
Imperial Door Symbols, Where are the door blocks?
F4T22P1#1
Buzzard, I downloaded IDS_V1.01.dcl and IDS_V1.01.lsp, but the door blocks needed for the program to run are not included. Could...
F4T22P1#3
Buzzard, I ran your door program, here was the response, Command: IDS_V1.01.lsp successfully loaded. I filled in what was required...
F4T22P1#7
Buzzard and James, I put the 2 files you mentioned in different location Acad Search Path and the result is the same. I use Acad...
F4T22P1#9
James, Thanks for your effort. It's still not working. That's OK for now. Thanks, Theodorus Winata...
F4T22P2#13
Buzzard, I downloaded your IDS_V1.03.lsp this morning and tested. It worked great! Thanks for fixing the pesky bugs. Theodorus...
| ||
| Menus and Customization | ||
|
Including my Accelerators
F7T1P1#4
Ryan, 4 more keys you can add on to your accelerators, INSERT; HOME; PAGEUP; DELETE and END keys, other than those keys...
| ||